eMule Pawcio 4.14 based on 0.30e
This version is
based on original eMule PAWCIO mod WebSite!!! by Rick164:clap:
Try also mods based on Pawcio with additional features/improvements (just click): Stormit NotDead eF-Mod Or mods that have some features from Pawcio: MorTillo The Black Hand For a description on "Bandwidth control" tab look below features list. Instalation notes:
Mainly there is need only to overwrite emule.exe file and lang catalog. If something is not working try clean install:
-create new directory
-put there emule.exe and lang dir from zip file
-create config dir and copy there clients.met, cryptkey.dat, preferences.dat, server.met, (nodes.dat for Kademlia only)
You need to have the most recend update fot Internet Explorer (IE 6.x SP1) for mod to run correctly, otherwise there is conflict between those programs and mod crash after connection to server.
Sources of libs needed to complie eMule:
ED2K link thanks to
doohb
ed2k://|file|Libs.rar|21133379|951CB21E82CA09921E78F314EF A84973|/|sources,81.218.10.61:4666|/
Version 4.14
1.
Pentium, P2, P3
ed2k://|file|emule0.30ePawcio4.14.zip|1396513|7E3D0B76618 54C8B8C79369F0C6936DE|/|sources,80.54.3.10:4662|/
2.
P4 optimized (also Celeron with SSE2):
ed2k://|file|emule0.30ePawcio4.14-P4.zip|1393068|DA871F62D2E2261A2D8A866351311A89|/|sources,80.54.3.10:4662|/
3.
AMD Athlon/Duron
ed2k://|file|emule0.30ePawcio4.14-AMD.zip|1397883|97C406C3591A0A3DFDD57861D2C63591|/|sources,80.54.3.10:4662|/
Main mirror thanks to Roman2K
--->
Mirror by Anybody
--->
Mirror by Masterle73
--->
Mirror by AmokK
--->
Mirror by aldee
--->
Mirror by elbosso
--->
Mirror by LD86
Sources:
--->
Mirror by Rick164
--->
eMule 0.30e Pawcio 4.13 Sources eMule Pawcio 4.13 TestClient based on 0.41a.10 This version is only a TestClient, so if there is a new Kademlia version please stop using this mod till update. More info on Kademlia (how to connect and use) can be found on this forum.
--->
eMule 0.41a.10 Pawcio 4.13 TestClient
--->
Mirror by Rick164
--->
Mirror by Anybody
--->
Mirror by Masterle73
--->
Mirror by elbosso
--->
Mirror by LD86
--->
Mirror by tomorrowman
Sources:
--->
eMule 0.41a.10 Pawcio 4.13 Sources
--->
Mirror by Rick164 Features: 1. Pawcio Bandwidth Control (Tag: "Pawcio: BC") - tab "Bandwidht Control" in Preferences.
Completly new upload/download system based on Maella (50 ms, packets splitting), ZZ (USS), and own ideas (DSS, ...) . -->A. Special algorithm for minimaliziation of opened slots (as an option: can be turn on/off by "Minimize number of opened slots" option)
-->B. Bandwidth Setting in 0.1 kB increaments (Maella idea)
-->C. Simplified options for USS and DSS(now you have to choose only the minimal upload/download and decide how much eMule should use your bandwidth - slider - no more need of % of lowest ping)
-->D. Advanced option for USS and DSS (you can exactly choose what max ping should be and which server to ping)
-->E. Auto managment of Max Connections and Max Connections per 5 second. If you set them too high BC can detect this(auto managment can be turn on/off by Manage of active connections)
Info: BC changes only too high settings (when managment is turned on), if they are resonable, they won't be changed
---> F. Pinging through UDP thanks to Dong, so if your ISP is blocking ICMP traffic you can select "UDP Ping" in "Bandwidth control" tab and it should work (you need to open UDP outgoing port (default 33434) and have administrative right in Windows NT and XP pro). If UDP sending can't be used BC will automatically move on ICMP version.
-->G. Possibility of "catching" whole eMule upstream/downstream within specified limits:
-->--> I: eMule protocol, IP, TCP, UDP header overhead (option "Include Overhead")
-->--> II: TCP connection negotiations (option "Include connections overhead") - empiric calculations
-->--> III: TCP acknowledge packets (option "Include TCP Ack") - empiric (doesn't not take account of RWIN size - only 2.5% of stream)
-->H. Cumulate upload bandwidth to certain slots (as an option - "Cumulate Bandwitdth for upload slots") - idea of ZZ:SlotFocus
-->I. "Session up:down 1:4 limit" from Morph Next.
-->J. Status of USS and DSS (working, preparing, etc) and all limits (up, down) can be seen on Bandwidth Control Tab (you can enter any value in Connection tab but limits of ratio are preserved, you can see them on Status on Bandwidth Control Tab)
-->K. There is new type of clients: Clients on reserved upload list (ready in any time to start upload):
-->--> - when "Minimize number of opened slots" is not selected, reserved client is added when client on upload queue is just ending its session (so reserved client is able to prepare before taking the freed slot - no delays)
-->--> - when "Minimize number of opened slots" is selected, there is quantified number of reserved clients (algorithm in CUploadQueue::AcceptToReserve)
-->--> - when "Cumulate Bandwidth for upload slots" is selected, reserved clients are very similar to Trickle Slots in ZZUL (so there is rotation between upload queue and reserved upload queue)
-->L. Blue lines added to graphs (in Statistic Window) showing whole current upload and download (with whole overhead)
Info:
When "Include connection overhead" is selected you have to set minimum 11kB/s (instead of 10kB/s) for upload limit to have unlimited download, and minimum 3.5 kB/s (instead of 3kB/s) to have 4x ratio.
When "Include TCP Ack" is selected Session up:down ratio (ZZ:RATIO from MorphNext) is forced. All limits you can see on Status - Bandwidth Control.
2. Features for RELEASERS:
-
Power Sharing from ZZ (safe MorphKad 0.4 implementation). File in Power Shared mode is automatically uploaded with full chunks, regardless what you set in preference.
-
HideOS / Selective Chunk Sharing from SF-IOM mod
- HideOS value and Selective chunk per file basis. Every file can have it's own values (right click on file in Shared Files window), so released files can have HideOS value 1 and Selective Chunk enabled (as Slugfiller recommends) and normal files default value (5)
-
Parts Selector - manually choose which parts are Enabled/Disabled (from Plus mod) or Auto managed (Auto means HideOS). Manually enabling/disabling works only for completed files and in power shared mode. Like in HideOS, if you block a part, but user can't take any other, the part is automatically unblocked for this user (so you won't become NSS for him).
-
Inteligent Chunk Selection from enkeyDev! - to avoid two or more users choose to download the same chunk, ECS relies only on randomness: users choose randomly *hoping* to choose a different chunk each; in ICS users exchange infos about what chunk is being downloaded ATM, then a user can choose the less-downloaded (priority: spread the file faster); in ICS the user preference "first/last chunk" take importance only when there are NO rare chunks (priority: spread the file); With ICS, the same situation is a release-mode one, then you will choose the shortest-to-complete chunk that is not being downloaded ATM by any other client. This increase the probability you and the other clients would have downloaded different chunks and keep (globally) a complete source for the file, though a couple of sources quit...
- Detail view of parts spreading with double click on file in shared files window
3. Release Window by IceBreak - access to news, releases from eMule!
4. Antivirus Check from The Black Hand mod - scan for viruses just completed files! (configuration in "Extended Settings" in Preferences)
5. Tray menu from eMule Plus mod with fast access to Upload Speed Sense (USS) and Download Speed Sense (DSS) options. (tag Pawcio: TrayMenu)
6. Anti-Leecher and Anti-Credits-Thefs feature from Morph Next mod (Can be enabled/disabled in "Extended settings" in "Preferences")
7. USS and DSS now in Scheduler. 8. PNR (Partfile Name Recovery) from enkeyDev! This feature writes and keeps updated the file "config\PNRecovery.dat" that will help you recover files when you lose the ".met". For each record in the file, the part number, ed2k link and file name are saved in fixed lenght format.
9. EDT (Estimate Download Time) from enkeyDev! (option in Extended Settings - for slow CPU <600MHz it's recommended to turn off) This works only between EDT compatible versions. It lets you known how much it will take to download from a specific source and is updated every reask (as the QR). The requester can see the EDT in "Remaining" column. The provider can see EDT for enqueued clients in their details window (N.S. means EDT "Not Supported" by that client). To have a reliable statistic, EDT performs no estimation until about 30 clients start download (and that can take very much). Anyway this is VERY experimental. Do not take EDT for an oracle, if the provider changes a file priority or shares another file or a million other things, your EDT changes consequently!
10. Save Upload Queue Waiting Time (SUQWT) by Moonlight. - save each upload queue client's wait time when it exits the upload queue and restore it the next time said client comes back in the queue
11. AutoPriority based on Valid Sources from Sivka (AutoHL) - on hard limit column you can see Valid Sources/Hard Limit; - variable Hard Limit with auto-function (50...1000, in-/decrease depend on priority of DL-file); - updating of Hard Limit is depended on Timer value; - Hard Limit per file will be initiate with value from usual used Hard Limit in preferences; - You can enter manually Hard Limit for individual files (right click - menu Sivka - AutoHardLimit)
12. Active Connection Control by Obelix - option in Extended Settings
13. Merge Known - saves statistics also for not completed files (from SF-IOM mod)
14. Drop High Queue Rate sources - usefull for 56K users (for others rather not because with time flow, queue ranks are decreasing). Drop is done the same way as original clients drops FullQ and NSS (can be enabled/disabled in "Extended settings" in "Preferences")
15. Winsock2 by eWombat 16. Toolbar from Kademlia client - you can use now skins!
17. New Credits (as an option in "Extended Settings" - "Pawcio Credits"):
- Range from 1.0 to 100.0
- Multiplier of 3 (instead of 2) ---- ratio = 3 * downloaded / uploaded
- For new clients (downloaded and uploaded data less than 1MB) ratio = 3.0 (instead of 1.0)
- If you have recieved more than 1MB from someone but haven't given anything back user gets ratio = 10.0 * recieved in MB (but not more than 100.0)
- Small bonus for clients that have given you many MB:
- if you get 100MB then user recieve ratio = 50.0 till you give back 108MB
- 50MB - ratio = 25.0 - 55MB
- 25MB - ratio = 12.0 - 28MB
- 9MB - ratio = 5.0 - 12MB 18. High priority process for eMule form MorphKad - option in Extended Settings
19. See own comments in Shared Files window from MorphKad
20. Mod version (partially form The Black Hand mod) - see what mods are using other users
21. Configuration of MSS in Connection Tab (from Morph Next and LSD mod)
22. Reconnect on LowID in Server Tab (by Tarod) thanks to WiRAHA
23. Code fixes:
- Maella fixes for Sockets
- fix in CUploadQueue::AddClientToQueue()
- fix in CUpDownClient::unzip()
- fix in CUpDownClient::TryToConnect()
Short guide (recommended settings):
USS/DSS Group:
- deselect "Max ping allowed"
- URL to ping - select Auto
- select options: "Minimize number of opened slots", "Cumulate bandiwidth...", "Include overhead", "Manage of active connections", "Include connection overhead".
- use slider (above "Max ping allowed" or on TrayMenu) to find best surfing experience.
Limits in USS group:
1. for T-DSL 768/128 (mostly Germany)
- Min upload - 11
- Max upload - 16
-
deselect "Session up:down limit" and "Include TCP Ack packets"
2. for T-DSL 1536/256 (mostly Germany)
Min upload - 14
Max upload - 30
-
deselect "Session up:down limit" and "Include TCP Ack packets"
3. for 512/128 (mostly France, Poland)
Min upload - 8
Max upload - 15
-
select "Session up:down limit" and "Include TCP Ack packets"
Description of "Bandwidth Control" tab: USS (Upload Speed Sense) Group:
USS (work of ZZ :respect: ) and DSS dynamically finds current, best upload/downlaod rate from the range of "Min upload/download in kB/s" and "Max upload/download in kB/s". "Max upload/download in kB/s" can be found automatically by selecting "Auto" box. USS/DSS lower the upload/download when other applications are using your connection or when mule is downloading very fast (lowering upload - important for ADSL user when download can be limited by upload). The key of USS/DSS to work is pinging a host. SS can find the proper host to ping for you (just select "Auto" box, on the right of "URL/IP to ping:" input box). If searching fails (very rearly) it uses host given in "URL/IP to ping". If you know which host to ping
unselect "Auto" box and input own address. By pinging, USS/DSS gets replies from host and on this basis it knows what to do (increase or decrease current upload/download). USS/DSS has to have a value to comapre with received respons from host, this value is "Max ping allowed". It would be the best if you could know what is proper ping for your connection (if you know, then select "Max ping allowed" box and input it). If you don't know, do not select "Max ping allowed" box, instead use intuitive slider above (it will find the proper ping for on the base of lowest ping calculated during preparation of USS/DSS). When you move slider on the left upload/download will be lower but you can surf the net easily, on the right - opposite behaviour.
Minimize number of opened slots - when this option is selected eMule will open less slots than original if it is possible (if less users can take more bandwidth). It means that the chunks will arrive faster to users.
Cumulate bandwidth for upload slots (idea of ZZ: Slot Focus - but a bit diffrent) - when this option is not selected eMule tries to upload to all users on upload queue with the same speed. Selecting this option is causing that eMule always upload to one user (Priority client - no matter wheter he has slow or fast connection) and then rest bandwidth gives for the fastest users (faster spread of chunks). Priority client is always client which was first on upload queue (stayed the longest), thanks to this for every client ("fast", "slow") will be a turn to get data.
Session up:down limit (1:4) (idea of ZZ, changed by MorphNext) - instead of 1:3 and 1:4 ratio for download (or unlimited when upload higher than 10) there is limit 1:4 for session. As long as you have downloaded less than 4 times the amount you uploaded (or you are uploading higher than 10kB/s) the limit of download is the same as value entered in "Connection tab" (so it can be unlimited). When you have downloaded more - the download is limited to preserve 1:4 session ratio.
Include overhead - eMule upload not only file data. It comunicates with other users (queue ranks, names of files, hashes, etc), server. If you want this upload/download can be included within limits defined in "Connection" tab or USS/DSS.
Manage of active connection - when this option is selected and you have too high values of "Max connections" and "Max connections per 5 sec for your connection, they will be adjusted automatically when needed.
Include connection overhead - not only eMule communicates between users, system and network layer also (on diffrent level). This system communication can take a lot of bandwidth especially when sorces are loaded (SLS system, or a file with a lot sources from server). It's almost impossible to calculate this overhead exactly, but an approximate is acceptable. You can include this overhead within upload/download limits (USS/DSS or "Connection tab"). Keep in mind that to have the unlimited download or 1:4 ratio with this option selected the limits for upload were chaned:
- unlimited download needs minimum 11kB/s upload instead of 10
- 1:4 ratio needs minimum 3.5 kB/s upload instead of 3
Include TCP Ack Packets - every data received needs to be acknowledged (it is TCP ACK packet), so it's generating upstream. The amount of overhead is hardly to calculate exactly, it depends on many settings (e.g RWIN). But as with "Include connection overhead" some approximation can be done (64kB/s downstream needs circa 1.5kB/s upstream). You can include this overhead within upload limits but then Session up:down limit (1:4) is enforced.
Status Group:
Here you can see what's happening with USS/DSS, what are the limits of download (limited by settings described above - so you don't have to calculate them) and what host is pinged. USS/DSS can be Disabled / Preparing / Succesfull / Failed.
Pawcio 4.14 - 15.02.2004 [FIXED] IMPORTANT - No sources asking when not uploading (thanks to Wolph)
Pawcio 4.13 - 29.12.2003
[CHANGED] Cosmetic code change to ICS
[ADDED] BC - detection of the end of upload of small files
[CHANGED] Cumulate Bandwidth possible without the need of minimalization of opened slots
[CHANGED] Include connection overhead possible without "Manage active connection" selected, but then session 1:4 limit forced
Pawcio 4.12a - 27.12.2003
[FIXED] Bug introduced to ICS by me.
[FIXED] Proper display (violet chunks) of incompleted chunks
[FIXED] Power Shared files score
[FIXED] LowID users getting immediately slots after already being on upload queue thanks to
dr.clone
[UPDATED] IPFilter.dat thanks to
Meuh6879
Pawcio 4.12 - 25.12.2003
[FIXED] EDT thanks to th1
[UPDATED] PNR version 2
[CHANGED] Behaviour of ICS thanks to Sir Boagalott*
[ADDED] QR diff colours from SF-IOM
Pawcio 4.11b
[FIXED] Decimal (.1) value for upload speed (bug introduced in 4.11b)
[REMOVED] rayita fix
Pawcio 4.11b
[UPDATE]To the base code of eMule 0.30e (Kademlia version has also added security fix from 0.30e)
[FIXED]rayita fix for srcpartfrequency
[FIXED]BC for high speed connection (number of opened slots)
[IMPROVED]Credits system (thanks to conversation with Sir Boagalott)
Pawcio 4.11a
[FIXED] A few seconds hangs on some system while Resume/Pause files (conflict between PNR and ws2_32.lib)
Pawcio 4.11
[REMOVED] OnTheFly optimization from eWombat
[FIXED] Small fix to UDP pinger
eMule Pawcio 4.1 (04.12.2003)
[FIXED] Some Bandwidth Control code
[ADDED] UDP ping by dong (If previously USS/DSS hasn't been working for you because your ISP blocked ICMP now it can work! thanks to dong work)*
[FIXED] Minimumcontingent Queue overflow by Xman1
[ADDED] ICS (Intelignet Chunk Selection) from enkeyDev!
[ADDED] PNR (PartFileName recovery) form enkeyDev
[ADDED] EDT (Estimated Download Time) form enkeyDev*
[ADDED] Auto Hard Limit by Sivka! (you can now select diffrent hard limits for every file or leave it to be done automatically)
[ADDED] Active Connection Control by Obelix
[ADDED] High priority process for eMule from MorphKad (as an option in extended settings)
[ADDED] OnTheFly processor optimization from eWombat!
[ADDED] WinSock2 form eWombat
[ADDED] See own comments in SharedFileWindow form MorphKad
[ADDED] Blue cross for clients able to use EDT and/or ICS
Pawcio 4.08 HOTFIX - 28.11.2003
[FIXED] Hang on connect to server
Pawcio 4.08 - 28.11.2003
[UPDATED] To the 0.30d base code.
[ADDED] Asterix '*' appears on status bar near the down speed when session 1:4 limit is reached.
[ADDED] Colouring on red files, not seen complete, as an option in "Extended settings"
[UPDATED] To the newest version of SUQWT by Moonlight
[CHANGED] The behaviour of Enable/Disable SUQWT, the restart is needed, but disabled means removed from RAM.
Pawcio 4.07a - 14.11.2003
[FIXED]Wrong wait time when SUQWT is turned on
[UPDATE]IPfilter.dat file (thanks to Meuh6879)
Pawcio 4.07 - 14.11.2003
[FIXED]Wrong wait time when SUQWT disabled
[ADDED]Full french transaltion by
MotteDeTerre
[ADDED]Files coloured on red when not seen full sources by Ded
[UPDATE]Changed algorithm for Cumulate Bandwidth
[FIXED] Fixed HideOverShares feature for last chunk.
[FIXED] PowerShare Limit don't depend only on the complet source (to avoid some possible wrong complet source report by other client or ours) by SiRoB (Morph)
[FIXED] Fixed refreshing while managing parts in Shared Files window
[ADDED] Added colours for manually choosen parts: black - Blocked, white - Enabled.
Pawcio 4.06 - 09.11.2003
[FIXED] Crash with QueueOverflow add-on (thanks to rafakolarowa and jeps)
[FIXED] Crash with changing settings in Bandwidth Control tab
[FIXED] Crash on exit
[FIXED] HotFix for number of completed sources by SiRoB, changed temporary a bit the way number of complete sources are calculated (more local dependence)
[FIXED] Filename parse to Anti-vir from "filename to "filename"
[FIXED] Sorting in transher window
[ADDED] Italian language by leonchip!
[UPDATE] Spanish language by Yabba-sp!
[ADDED] Save Upload Queue Wait Time (SUQWT) by Moonlight as an option
[ADDED] Icons for files in transfer window
[ADDED] Limit setting for PowerShare, part file form 1 to 20, completed file 1 - 50
[ADDED] Advanced button in Bandwidth Control tab to hide advanced setting for novice users ;)
[ADDED-KADEMLIA] Server name in detailed window
Pawcio 4.05 - 05.11.2003
[FIXED] Crash reported by Anybody
[FIXED] Waiting queue overflow for PowerShared files and clients with High Ratio
[ADDED] Waiting queue overflow Minimumcontingent by Xman (option in Extended settings)
[ADDED] Infinite queue by SF-IOM (option in Extended settings)
[UPDATE] MobileMule 0.6b
[ADDED] A4AF filenames, changed sort column of Download window
Pawcio 4.04 - 02.11.2003
[FIXED] Blocking of eMule
[FIXED] "Rare" ;) exit on file completion
Pawcio 4.03 - 02.11.2003
[ADDED] MobileMule 0.6x code
[FIXED] Small code fix
[REMOVED]Safe-hash
eMule 0.30c Pawcio 4.02 - 01.11.2003
[FIXED] PNG bitmaps for toolbar
[ADDED]Allow waiting queue overflow for power shared files and clients with high ratio (>3.0) as option in "Extended Settings" tab
[ADDED]Maella extended clean-up
[IMPROVED]A bit lower cpu and memory usage than in previous versions
[IMPROVED]Code cleaned
eMule 0.30c Pawcio 4.01 - 28.10.2003
[FIXED] Fixes to errors reported in dump files (crashes).
eMule 0.30c Pawcio 4.0 - 26.10.2003
[ADDED] More stable upload/download during high CPU usage by other programs
[ADDED] HDD protection by skynetman
[FIXED] PowerShare for small files (MorphNext)
[FIXED] Other fixes to code.
eMule 0.30b Pawcio 4 RC - 23.10.2003
[FIXED] Crashes on exit and server reconnect
[FIXED] Proper change of the skins
[FIXED] Improved auto new-connections managment
[FIXED] Completed sources by zegzav
eMule 0.30b Pawcio 4 BETA 2 - 21.10.2003
[FIXED] Crash on empty shared file list
[FIXED] Friend list crash
[FIXED] Cancel upload attack 100% cpu usage
[FIXED] Proper display of HideOS and Selective Chunk on context menu (right click in Shared Files)
[FIXED] Code dealing with sockets
eMule 0.30b Pawcio 4 BETA - 19.10.2003
[ADDED] DSS - download speed sense is now implemented
[ADDED] Power Sharing form ZZ/MorphKad 0.4
[ADDED] HideOS/Selective chunk sharing form SF-IOM.
[ADDED] HideOS value and Selective chunk per file basis (every file can have it's own values) - more detail on the features list
[ADDED] Parts selector for Power Shared and completed files (more on feature list on the first post)
[ADDED] Toolbar from Kademlia (Dann's skins included in the zip!)
[ADDED] Drop High Queue Rate Sources (especially for 56K users). Droping is done in the same way as original eMule drops FullQ and NSS (option in "Extended settings" tab)
[FIXED] All new (comparing to original eMule) options are now grouped in "Extended settings" tab under "Additional Tweaks" group.
[FIXED] CONNETION_TIMEOUT value is back to original 40000 (from 25000)
[FIXED] Other small fixes:
- proper save of decimal value
- working feature "Full chunks for Release files"
- no more dialog with "29 characters"
- fixes to bandwidth code
Alpha4 version - 01.10.2003:
[FIX] Fix to Bandwidth Control code (prevent crash)
[ADDED] Spanish, French, German (partial) languages
Alpha3bHOTFIX version - 30.09.2003:
[FIX] Fix to CDownloadQueue::SortByPriority() to work with CheckDiskSpace (caused problems with connecting to server)
Alpha3b version - 29.09.2003:
[FIX] USS Scheduler now fully compatible with 0.30b
[FIX] Sorting of eMule version
[ADDED] Check Disk Space (SlugFiller - option in "Extended Settings") thanks to Meuh6789
[ADDED] Anti-leecher and Anti-Credits-Thefs feature form MORPHNext (option in "Extended Settings") thanks to danielsan81 and sam06000
[ADDED] Up/Down Column from LSD thanks to sam06000
[ADDED] Reconnect on LowID (Tarod - "Server" tab in "Preferences") thanks to WiRAHA
[ADDED] WebServer files in zip (thanks to LD86)
Alpha3a version - 29.09.2003:
UPDATE to eMule 0.30b code
Alpha3a version - 27.09.2003:
[FIXED] Performace fix for Bandwidth Control
[FIXED] Bug in DwonloadQueue (thanks to lcf)
Alpha3 version - 27.09.2003:
[FIXED] Yellow icons again(thanks to MorTillo)
[FIXED] Fast cycling of queue when no connection (thanks to Meuh6879)
[FIXED] Important fixes and tunes for Bandwidth Control
Alpha2 version - 24.09.2003:
[FIXED] Number of opened slots
[FIXED] Yellow icons of clients now displayed properly in transfer window[/color]
Alpha version - 22.09.2003
Best Regards,
Pawcio
![[eMule-Web]](images/satellite/header/logo.jpg){kind=logo}