these files are more than enough. (e.g. bak files you don´t need, but it also doesn´t hurt to copy them)

The only problem is that I'm reluctant to try the official client, even for some days, because your Xtreme mod works so xtremely good!

I never thought much about any eMule mod, but recently I read about some features on the official eMule board that made me interested, and Xtreme was the first choice. I'm downloading many very rare files, and this mod do handle them much better than I'm used to. I will have to read on about the handling and propagation of rare files (1-2 full sources), and maybe try some other mod (zzul probably, from what I've read) to see if I can notice any difference. I'm also curious if it's possible to adjust the upload- and slotspeed to the available bandwith without having a limit or calculating the latency, because I'm using cfosspeed, a traffic shaping driver that simply trashes all attempts I've seen to adjust the upload speed for eMule. But that is a later question, it's working good enough now. Many thanks!

@ Xman

I first tried Xtreme 5.2.2 when this problem appeared. I moved to 5.3 beta. I moved to 5.3 final.

In between there.... I just drop various non-Xtreme based mods in the folder (just emule.exe) and uploads (for the same files partial or complete) worked flawlessly. I drop Xtreme back in and problem resurfaces. I recreated the ini files. I even performed a clean install. Still same issue. I understand ScarAngel is based on Xtreme code, but the queue seems to move more rapidly in Xtreme than scarAngel. ScarAngel will sometimes stall on Reading disk and then work. If Xtreme stalls on Reading disk, it is 100% failure. Client is not returned to waiting queue. They fail to appear sometimes permanently. During all this, client can still be connected and uploading to me.

MorphXT, NetF, official, basically all non Xtreme clients do not exhibit this behavior. Don't worry about further troubleshooting. I have moved to another mod and will stay there. I appreciate your assistance. ;)

@Wilhito
I don´t think this is a common problem.. because there are a few hundret thousends of Xtreme >= 5.2 out there and nobody has reported such a problem. Also I never got a failed downloadsession from a Xtreme.
The question is, what is different at your system ? What OS do you use ?
And you didn´t give me the right answers.. if the problem is related to special files or to all files ? You only told me that Morph 7x worked... but that isn´t interesting... only morph 8.14/9.0.
If you want to help me solving this problem, I can give you a special debug-version which logs every action.... but this would need that you investigate some time. Tell me if you want.

Hi!

I'm new to Xtreme MOD and I really like it. There's one detail though, which is not very important. I don't like the round gray buttons on the toolbar interface.

Does it support eMule skins?

Thanks!

avic

There is one thing that is not very clear to me.

Without NAFC when I set the upload limit to >=11.0 the download limit becomes unlimited, but in case the real upload limit being lower, in case of throttling, for example 6 kB/s, will the download limit remain unlimited or will be applied the eMule rules? And with NAFC?

Thanks.

@avic
yes.. you can use every available emule skin.

@yesgrey3
works like official emule. If you don´t use any dynamic uplodasystem (USS/NAFC) you get unlimited download depending on your set uploadlimit, not the real upload. Other with NAFC(or USS) where the real upload is meassured and your downloadlimit is set dynamicly.

About the "2006-10-01 11:06:39: ERROR while saving part file: 046.part.met (<filename>) - Permission denied"-messages (hundreds of them for all files) - they don't appear with the official version or the ZZul mod, only in Xtreme. I have used the same settings, copied straight from my Xtreme installation, using the same Temp-folder. Have you tried safe .met/.dat writing yourself yet?

hmm... do you use any encryption-software on your temp-folder ? Do you use an Anti-virus software which checks the tempfolder ? If yes, try to disable. And also make sure that very users (not only the admin/you) have all permissions at the temp-folder.

I've given full permission to users for the Temp-folder and files, my antivirus just checks files when executed but I've turned off checking for that folder just in case, and I don't use encryption. Still errors...

Are there anyone reading this that can try enabling safe .met/.dat writing (under extended settings) and confirm that you don't get errors? You may have to let it run for some hours at least, preferable longer.

I have it always enabled and I never got errors. (Total runtime: a few months)

Kind Regards
aalerich

@Naugas
and what happens when you disable safe met/dat writing ?

If I don't enable it I get no errors. But I really don't know the difference with these modes...? I used to have it enabled because I had problems with my graphics card that locked up the computer and forced me to do a hard reboot sometimes. I have just assumed that safe writing is what it sounds like, making the data more consistent in case something like my problems happen.

But it seems like these errors doesn't occur as often now. In six hours there have been only one warning, when I first installed Xtreme I had many more in the same time, maybe 10-50 of them. But I have exactly the same settings. So it's should be something in my system that's behaving strange... Could it be some sort of overflow with handles to files? That there have been too many file-writes/-reads at the same time when I had these errors? (I'm running uTorrent at the same time, and right now the load is way less than a few days ago.) But it's very strange that I've never seen this error with other eMule versions. In the last days I've tried the official, zzul and the warp mod with the settings copied right from the Xtreme config folder, and didn't see this error once, nor have I ever seen it in previous years when using the official and eMulePlus.

without safe writing the OS decides when the files are really written... at the meantime the data is somewhere at the cache, managed by windows. It shouldn´t be a big problem if you disable this option. You always have a bak file you can use when the original file is damaged.

possible.
remark: there can be problems when other prgrams are also using the same files as emule... e.g. onlinesig or bittorrent.

What is this?
 

http://img157.imageshack.us/img157/1277/xtremeym7.png

[ZAS&]
[>;r\]
[[S>V]
[ZY!v]

What is this?

it's the anti-nick-thief! IMHO it's like an unique identification created by xtreme mod....

regards
myth88

Anti-Nick-Thief has been invented by WiZaRd and was already implemented in the old iONiX-Mod. Xtreme is just using it like many other mods do.

Thankful friends...

Any plans for English forum support soon (outside of this thread)? Using Babel Fish all the time is tedious!

Problems uploading
 

I think this program should be better for the people who want spread some files, I can't understand why is too complicate upload some new files, I have right now two files in powerRelease and only can upload one out of seven from the files I'm powerReleasing, I'm seeing how are people downloading with low ID and others files which I have in very low upload, sorry but I cant understand why. Is too difficult upload in this way. I just wanted to say my opinion about that problem which I think is crucial for the emule future, I can't spend one month for release a file.
I only wanted to express my opinion about this, thanks.

@adamlau
you can also have a look at the second Xtreme-support-forum:
Official eMule-Board -> Xtreme MOD

@scarecrown
powerrelease-files already get a very high boost. But it can happen that it takes a while until the clients which want your files find you. Also make sure that you didn´t enable multiqueue, because this option always tries to spread the upload over all files.

You can set the forum language to English (see attached screenshot) for easier navigation. The control resides at the bottom left corner of every page.

xtreme bans xtreme?
 

hello m8s. :dance


im using xtreme 5.3.1 since a couple of days ago and i noticed something strange in the logs:

ok, one dewd's already hacking xtreme into making it a leecher mod...

however today it appeared again, different user from different IP range:

is this normal? what can causing this?

thx for your help :beer:

[edit by Pathfinder: IP adresses masked]

no need to post this on two baords ;-)

I gave the answer here:
Dlp (dynamic Leecher Protection) - Official eMule-Board

Hi! Here's a feature request: being able to exclude files from the share. There's a number of files in my shared folders that have no reason for being shared. (And yes, they have to be in those folders...) eMulePlus have this feature, right-clicking on a file in the shared files list and setting upload priority to hidden or something like that. If I remember correctly I've also seen something like a configurable filter with masks to exclude, and I guess that works in many situations too, although not so well for my needs.

I don#t like this idea .. especially with the filters.
why you don´t remove the files you don´t want to share from the folder ?
I think you have a much better overview what´s beeing shared when a whole folder is shared and not only some special files.

thx for replying :) i just didnt know that u were watching them both :chuckle

mods extreme which it has been the best one for you?
 

boys I have found myself very well whith extreme the 4.8.2.Now today which the better version?(of all those that are from the 4.8.2 to the 5.3.1)

ps :whistleexcused but sò not to speak the english use like translator babel fish


hello to all

Normally the newest version is the "better" one because it based on newer original version and has new features and a lot of bugfixes ... try it of yourself. :-)

configuration extreme 5.3.1
 

I am trying the last version of extreme but I have a small problem on the configuration are new things, and therefore sò if I must activate something, or I do not leave all in default you I leave you a more expert other question but the option of the offuscamento system I must activate?

@babykiller
you can keep all things at default-values. All new features are explained on the Xtreme-hompage.

Hi, first of all this mod is amazing, thanks ;)
The only think I can't get to work is random ports with upnp enabled.
Emule works great, don't worry, but the ports opened everytime are always the same.
Tried also with a fresh install, but even with the two options for upnp and random ports checked emule opens the ports specified in the connection window.
Edited preferences.ini too, cleaning TCP e UDP port and leaving random enabled: it starts random ok, but when I restart emule the ports are again the last used O_o


Suggestions?

the UPNP only uses random ports if your specified ports are already used by an other application and therefore can´t be opened.
I know, the label of this option isn´t clear enough, but the description at Xtreme-homepage is.

You're right, I'm reading it just now ^^ and it says that very clearly

In "feature requests" topic I don't see english requests, I'd like to see emule extreme using different random ports everytime it starts. Can I ask here?

Thanks for your quick reply ;)

yes you can ask... but there is not one good reason to use different ports on every restart. What should this be good for ?
If you know that your provider blocks ports e.g. 4000- 6000 and you use random ports, you have good chances that emule would choose such a port.
If you know that ports e.g. 800 - 900 are working well, just use them.

exchange slot does not work
 

I receive given but to not shipment them like never?
I have emule 0.47c extreme 5.3.1

hello everybody
thank for your great mod!Also its nice to write here for sharing the information

i have 3 questions ,

is it possible to connect a server otomaticly when i open extreme mod.because sometimes server is becoming dead so i need a self connecting solution.

second question is mod started to choose passive sources al heads on left are red if there are 100 sources 40 of them are red !how can i put my self in queu ?

third question is cant i use my internet connection while i am connected to emule,for exp its not posibble to search something on google.its so slow!


sorry for bad english!thanks for your replies....

Why am I uploading at higher rate than my set limit?
 

The title says it all. I set upload limit to 6KB/sec, but oddly I am uploading usually arouind 18KB/sec. This is both in the global upload speed setting and in the preferred limit (i guess?) speed setting. The slot speed is set to about 2KB/sec. So I have 3 uploads going and each one is uploading 6 KB/sec. This is against the setting i have made. Can you help me understand and fix this?

Thank you!

d3ejmz